Foaming Bath Butter Base

Foaming Bath Butter Base
Foaming Bath Butter BaseFoaming Bath Butter Base
Foaming Bath Butter  eBotaniq FBB which is our Foaming Bath Butter also occasionally referred to as Sugar Whip is designed for use as a whipped product  and/or tube fills. The product is incredibly flexible for the creative formulator. Formulators can create simple whipped foaming bath bu ...Read more
AUD9.90 each
No vote

  • Description

Foaming Bath Butter

 eBotaniq FBB which is our Foaming Bath Butter also occasionally referred to as Sugar Whip is designed for use as a whipped product  and/or tube fills. The product is incredibly flexible for the creative formulator. Formulators can create simple whipped foaming bath butters, a sugar scrub, a body soufflè, or a salt scrub, all from one product base.

To process, simply use a hand held mixer- and whip/beat the Foaming Bath Butter in a bowl that can hold the total finished volume , follow the start of the whipping process by adding sugar/salt, fragrance and or essential oils [or any other additives thay you may want to include] and continue whipping until the desired volume is achieved.

Alternatively  you can heat to maximum of 60ºC wilst maintaining stirring, add colour, fragrance    Allow to cool to 53-55ºC while still stirring.  Add any extras you would like,and stir while cooling to 52ºC.  Fill your containers and/or pour into tubes, while the mix is between 47º and 52ºC to ensure the best results.
Allow to further cool and gellyfy

Note that this soap is not mouldable and will always stay soft and buttery, this scoopable, soft and moisturising soap base should be packed in tubes or tubs.

See the Stephenson Video in the Cold whipping tab below

Should you require different packsize contact us with your requirements  sales

Ingredients INCI


  • Water,
  • Glycerin,
  • Sodium Cocoyl Isethionate,
  • Sorbitol,
  • Disodium Lauryl Sulfosuccinate,
  • Sodium Chloride,
  • Phenoxyethanol,
  • Tetrasodium EDTA


Cold Whipping


Another application is by cold whipping the Foaming Bath Butter

In this example we start with the basic procedure– and then additives can be added such as sugar and/or salt to produce products such as sugar scrubs, salt scrubs, body parfaits, shaving butters.

Equipment Needed

  • Scale
  • Spatula/ knife to cut up the Foaming Bath Butter
  • Rubber gloves
  • Mixer;   preferrably a stand mixer with a flat beater
  • a Stainless teel whip beater
  • Stainless steel vessel
  • Vegetable Oil/wax
  • Low Profile Jars with wide mounth and Lids
  • Thermometer (to monitor oil temperature)
  • Foaming Bath Butter Base
  • Soap colorants
  • Fragrance Oil


Take of Foaming Bath Butter base and place required amount in the mixing bowl. Cut up the base,  the smaller pieces make it easier to begin the whipping process.

Begin slowly beating the Foaming Bath Butter base using a Flat Beater - this helps to prevent clump-ing up of the base inside the wire whip beaters when you get ready to whip the base.

Use a Carrier oil or butter if you want to make it more moisturizing. You can use up to 50 gram of oil or butter to 1 kilo of foaming bath butter base. .

Heat up the Vegetable Oil to about 50 deg C degrees. This helps in softening up the base without making it too hot and helps with the whipping. DO NOT overheat the Foaming Bath Butter Base. If you increase the base temperature over 60 deg C it will cause a break down in its preservative properties.

Add the warm oil to the Foaming Bath Butter.

Add your Fragrance Oil. The recommended level is 2 - 3%.  this means that for a 1 kilo base add 30ml (ie 3%) fragrance oil. This base will accept a maximum fragrance load of up to 5% (not higher).

Once you have progressed to a smooth mix and if working with a stand mixer, switch over to a whip beater.

Begin whipping the base on low speed and as it becomes smoother gradually increase to high (about 30 seconds). At the 2-minute mark, stop the mixer and scrape down the sides of the bowl (with arubber spatula) and continue to whip on high for a total of 5-10 minutes. You will notice that it begins to increase in volume.

Continue whipping and stop when the base doubles in volume.  If you whip it to higher volumes such as 3 or 4 times its volume, the Foaming Bath Butter will collapse.

Take the whipped Foaming Bath Butter and slowly add the sugar. Begin by adding 500-750g of sugar/kg mix and slowly folding the sugar into your whipped base.

It's important that the mix becomes oversaturated /supersaturated to prevent dissolving the sugar/salt to maintain a crystaline structure.

Dispense the scrub into jars (Tip: use pastry bag or the like (e.g. ZipLoc bag)

Allow the product to set in the final packaging for 24 hours before use.

It is highly beneficial and suggested to add a little additional preservative to the Foaming Bath Butter Base before whipping.  (follow instructions according to the preservative of your choice).

Play the stephensons video below to see how


Here you will find Product Safety Data Sheets (MSDS) and Technical Data Sheets when available. The files are in PDF format. To access a file click on the relevant button or the file name. For your convenience it will open up in a new browser window.

Please note: You must have Acrobat Reader to view the files listed here. If necessary the Acrobat Reader link will directed you to a page where it can be downloaded.

Safety Data Sheet


Technical Data Sheet



Related products

Results 1 - 1 of 1

We accept


we also accept  EFT payment direct from your bank to ours


Find out what's happening

This subscribes you to our newsletter(s), product updates and adds reward points upon purchases.

Can't find it ?


 Interested in our products? is there something you are looking for that you don't see on this site?
Fill out our contact form or call 0490069282.

Need to talk to us?

ContactUs iphone215x150

Whilst we are most of the time away from the office,we understand that there are times you need to contact us. So please leave a text message on the phone +61 (0)490 069 282 and we will get back to you ASAP;  typically this will be after 17h00 or the next day.

The best way to contact us is via email

Back to top